Brunton Air the Complete Solution

Print page

 

Brunton Air is a complete solution for the control of air handling units. It comprises the latest technologies in communication and design and replaces traditional hardwired solutions.
 
With the contemporary design and the user-friendly programming, Brunton Air is the perfect solution for air handling unit manufacturers, when it comes to factory-supplied controls.
 
The automatic bus configuration, which is the very heart of the Brunton Air solution, makes installation and commissioning a walk in the park.
 
The total integration of controls and power electronics is unsurpassed in the industry and as your partner for controls and power electronics we know our responsibilities. Your system must work – Period.

FUNCTIONS

 
One Button Programming
With the handheld terminal for the Brunton Air solution, there is only one button to worry about when programming the entire system. Just turn and push the knob and you are in control. With the 8 lines in the backlit LCD display you never loose track of where you are.
 
Dedicated Frequency Converters
Dedicated frequency converters guarantee a complete integration between the drives and the system controls.
The drives are designed as remote I/O modules for the master controller, e.g. with built-in pressure transmitters, thus making installation simpler and saving on wiring and hoses.
 
Digital temperature sensors
Why let the accuracy of a temperature depend on the cable, electrical noise and other installation issues.
The Brunton Air solution incorporates the latest in digital sensors connecting all sensors to the master module or to the frequency converters using serial communication with intelligent fault detection.
 
Minimalist Master
Because of the internal communication being handled via serial communication and because of the use of remote I/O modules, the master the master only has a limited number of functions, which are connected directly to the master controller.
In spite of this the functions and information offered goes far beyond that of a normal AHU controller.
 

Rotary Heat Exchanger Controller
With the complete integration of the RHX2 controller, the full power of heat recovery is made available to our Brunton Air costumers.
Trim the operation of you rotary heat exchanger to your every need.
For more information on the RHX2 visit the product page here.

 

Power Controllers
The complete range of power controllers from Brunton Electronics are a perfect match to the Brunton Air solution, when electrical heating batteries are to be controlled.
For more information on the power controllers visit the product pages here.

 

LonWorks Communication
Using the dedicated LonWorks gateway connecting the air handling unit to a BMS system has never been easier.
All information and programming available in the handheld terminal can now be accessed over the LonWorks network.
Instruction and XIF file are available from the download section.

 
SMS Alarm System
With the Brunton Air solution it is now possible to transmit alarms from the master controller to any GSM telephone. It is even possible to direct urgent alarms directly to the service technician, while the janitor handles low priority alarms.
 
CE MARKING
 

The modules in the Brunton Air solution meets the requirements of the below standards.

 

EMC DIRECTIVE

LOW VOLTAGE DIRECTIVE

EN 61000-6-2:2002

EN 61000-6-3:2002

EN 60947-4-3:2001

 
PRODUCT PROGRAM
 

Type

Product

OJ-CTRL-6700

Controls package with handheld terminal, master, 3 digital ductwork temperature sensors

OJ-FCxxx

OJ Air Frequency Converters 0,55kW; 1x230VAC to 5,5kW; 3x400VAC

RHX2-1xxx

Rotary Heat Exchanger Controller 2Nm to 6Nm

OJ-SMS2-6000

SMS Alarm Gateway

OJ-MODEM

GSM Modem

OJ-LON

FTT10A LonWorks Gateway

 
ACCESSORIES
 

Type

Product

OJ-ETFD-1x

Digital Ductwork Temperature Sensors

OJ-ETF-1670

Digital Pipe Temperature Sensor

OJ-ETF-1770

Digital Outdoor Temperature Sensor

OJ-ETF-970H

Digital Room Temperature Sensor

OJ-ETF-570

Digital Equipment Temperature Sensor